SiChuan YuLinLin Trading Co., Ltd.

Chengdu forest bench

Six services · one canopy survey bench

Every plot sheet we are trusted to keep FILED

SiChuan YuLinLin Trading Co., Ltd. runs canopy sheets, plot runs and client letters from the Chengdu forest bench at No 16 Fuzhu 1-3, Wuke East 4th Road, Jitou Town, Wuhou District, ChengDu City - 610000, China (CN). The bench is set up for one purpose: to measure a stand accurately enough that the design work built on it holds up for years. Below is the full set of services — write to the bench to begin a survey.

Request a survey plan

SiChuan YuLinLin Trading Co., Ltd. opens its grove window to every client who needs a plot measured before a system is drawn.

The six services, described in full

Each service below is a complete unit of bench work. A project may use one of them or all six, but the order is fixed: measure, note, write, window, review, sit.

Canopy Sheet Bays

A canopy sheet bay is the smallest unit of measurement at the bench. The surveyor marks a fixed rail point at the edge of the stand, then works across in a straight line, reading crown height at every marked interval with a rangefinder. Each reading is written on the green canopy sheet clipped to the bench rail, not on loose paper. Because the rail point never moves, a second visit months later produces readings that can be laid directly beside the first. Bays are grouped into blocks and each block receives a plot mark, such as C, F or Y, so any sheet can be found and matched to its stand without consulting a separate index. This is the service most clients ask for first, since a dependable crown map answers the most basic question of any site: how tall is the canopy that the new system must work around.

Once a bay is complete, the sheet is copied at the bench desk and the copy is filed under its plot mark. The original stays on the rail until the whole block is closed, so field corrections can be made in place rather than on a duplicate that might drift out of agreement with the source.

Plot Note Runs

A plot note run is a short walking sequence through a marked plot, with notes taken at fixed intervals and never reconstructed later from memory. The surveyor carries the same field satchel used for client letters, so notes, sketches and any pressed samples stay together until they reach the desk. Each run begins and ends at a recorded rail point, which means the distance walked and the ground covered can be checked against the bay sheets. Notes are deliberately short and factual: a species seen, a change in understory density, a gap in the crown, a boundary marker. The run sheet is then transferred to the survey card the same afternoon, while the ground is still fresh.

Runs are scheduled so that no plot is noted under unusual conditions, such as heavy rain or heavy foot traffic, without that condition being written down. A note that looks odd years later can then be explained rather than argued about.

Client Letter Desks

Many clients do not want a technical sheet; they want a clear written summary they can read at their own desk. The client letter desk exists for exactly that. Letters are drafted from the plot sheet itself, never from a summary of a summary, and each letter carries the plot mark and the date the survey was taken. The desk keeps a plain file of every letter issued, indexed by plot mark, so the written record and the field record stay in step. If a reading is later corrected, the correction is noted in the letter file as well, and a revised letter can be produced quickly.

The tone of these letters is a matter of care at the bench. We write plainly, state what was measured, state what was not measured, and leave no room for a reader to assume a level of certainty the survey does not support. A short, honest letter is worth more to most clients than a long report that overstates itself.

Understory Windows

An understory window is a sightline reading taken through the growth beneath the crown. The surveyor stands at a rail point and records what can be seen through the lower layers at eye level and at knee level, then notes the density of that layer in plain terms. Each window is drawn on its own small sheet and pinned to the plot map, so the design team can see where clearance is generous and where it is tight. This service is especially useful when a new integrated system needs a service route, a small structure or a clear path through a stand that has been left to grow freely.

Windows are read in more than one season where the schedule allows, because understory density changes greatly between the wet and dry months. Where only one season is possible, the letter to the client says so explicitly, so the design is never built on a hidden assumption.

Species Review Rounds

Every species recorded during a plot note run is reviewed in a round against the pressed sample held in the specimen press. The press is the bench reference, and a name on a plot sheet is only allowed to stand if it matches the sample or has been confirmed by a second surveyor. A round works through the plot file species by species, correcting any mismatch on the spot and replacing the draft sheet in the file with the corrected version. Rounds are run before the client letter is drafted, so the letter never quotes a name that has not been checked.

Where a sample is incomplete or ambiguous, that is recorded plainly as an open item rather than forced to a name. The review round exists to prevent quiet errors, not to make every plot look neatly finished.

Grove Sittings

A grove sitting brings the client to the bench and then to the measured ground. The surveyor walks the client along the same rail points used for the bay sheets, points out the readings that shaped the plot map, and answers questions where the measurements were taken. In practice this settles most open questions before design work begins, because a client who has stood beneath a tall crown understands the constraint far better than a client reading a height figure in a letter.

A sitting is usually scheduled after the species review round, so the ground the client walks is the ground recorded in the finalised file. Any change requested at a sitting is written down immediately and added to the plot file with its own date, keeping the chain of decisions intact. Sittings can be arranged for groups or for a single client representative, and they are the service most often repeated across a long project.

How a survey moves through the bench

One

Walk and set the rail

The stand is walked once, a rail point is fixed and the bay layout is agreed before any reading is taken.

Two

Read and note the plot

Crown heights are read bay by bay and plot note runs are walked at fixed intervals the same day.

Three

Review and write

Species review rounds confirm the file, then client letters are drafted at the desk from the confirmed sheets.

Four

Sit and confirm

A grove sitting walks the client across the measured ground before the design team is handed the file.

Start with a single plot sheet

Tell the bench the stand, the intended system and the deadline, and we will propose the smallest survey that answers your real question. Most projects begin with one canopy sheet bay and grow from there.

Send a request to the bench →